Table of Contents
Advertisement
The following describes how to use several commands on this screen.
S
Configures to enable or disable the notification of the system log regarding the PPS.
Press S (command), and then the appearance of the command prompt becomes "Enable
or Disable Notification Status (E/D)>
C
Specify the target port to obtain the statistical information on packets in the PPS viewer.
Press C, and then the appearance of the command prompt becomes "Enter port-
number>". Enter the port-number to be specified.
D
Deletes from the target port, which obtains the statistical information on packets in the PPS.
Press D, and then the appearance of the command prompt becomes "Enter port-
number>". Enter the port-number to be deleted.
I
Specify the interval of notifying the statistical information on packets in the PPS viewer.
Press I, and then the appearance of the command prompt becomes "Enter counter
interval>". Enter the notification interval in the range from 1 to 120.
Q
Returns to the top menu.
"
. Press E to enable and D to disable it.
165
Advertisement
Table of Contents
