Exception Handler - Panasonic PN261693D Manual

6.4. Exception Handler

Press X on the Switch Tools Configuration menu to see Exception Handler as Figure
6-6 below. This screen allows you to configure the operation during the exception
handling.
PNxxxxxx Local Management System
Switch Tools Configuration -> Exeption Handler Menu
Exception Handler:
Exception Handler Mode:
-------------------------------- <COMMAND> -----------------------------------
Enable/Disable E[x]ception Handler
Set Exception Handler [M]ode
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Exception Handler
Exception Handler Mode Displays the method of the exception handling. The factory default
Disabled
Debug Message & System Reboot
Figure 6-6: Exception Handler
Displays the status (or condition) of the exception handling function. The
factory default settings is Disabled.
Enabled
Disabled
settings is Debug Message.
Debug Message
System Reboot
Debug Message and
System Reboot
185
Indicates that the exception handling is enabled.
Indicates that the exception handling is disabled.
Output a debug message on a console when
detecting the exception handling.
Automatically reboot the system when detecting
the exception handling.
If the exception handling is detected, output a
debug message on a console before the auto-
matic reboot.