Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Panasonic RD-AA8190-01
Summary of Contents for Panasonic RD-AA8190-01
- Page 1 PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem Panasonic Avionics Corporation 26200 Enterprise Way Lake Forest, CA 92630 PRODUCT DESCRIPTION Enhanced Cell Modem PART NUMBER: RD-AA8190-01 PROPRIETARY AND CONFIDENTIAL PAGE 1 OF 22...
-
Page 2: Table Of Contents
PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem TABLE OF CONTENTS GENERAL ............................4 Purpose ............................. 4 WIRELESS DATA INTERFACES ...................... 6 Frequency Band or Channel Usage ....................6 Hardware Maximum Transmitter Output Power ................6 Hardware Reset Button ........................6 Cellular Interface .......................... - Page 3 Enhanced Cell Modem LIST OF FIGURES Figure 1: RD-AA8190-01 Enhanced Cell Modem Outline Drawing ..............4 Figure 2: RD-AA8190-01 Enhanced Cell Modem Outline Drawing (continued) ...........5 Figure 7: eCM Front Panel ...........................6 Figure 3: LRU Block Diagram(s) ........................ 14 Figure 4: Center of Gravity ........................15 Figure 15: FCC ID ............................
-
Page 4: General
• Loads and monitors Digital Right Management (DRM) key. ➢ The eCM Outline Drawing is shown in Figure 1 and Figure 2 are for reference only. Figure 1: RD-AA8190-01 Enhanced Cell Modem Outline Drawing PROPRIETARY AND CONFIDENTIAL PAGE 4 OF 22... - Page 5 PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem Figure 2: RD-AA8190-01 Enhanced Cell Modem Outline Drawing (continued) PROPRIETARY AND CONFIDENTIAL PAGE 5 OF 22...
-
Page 6: Wireless Data Interfaces
PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem 2.0 WIRELESS DATA INTERFACES 2.1 Frequency Band or Channel Usage • 2.412 GHz – 2.4835 GHz (802.11b/g/n). • 5.180 GHz – 5.825 GHz (802.11a/ac/n). • 717 MHz – 2690 MHz (LTE band). •... -
Page 7: Cellular Interface
PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem 2.4 Cellular Interface ➢ Frame Format & Protocol: • ETSI TS 125.101 (3GPP). ➢ Topology: • User Equipment (UE). ➢ Data Rate: • DL/FDD/Cat6: 300 Mbits/s with 2x2 MIMO antenna. • DL/TDD/Cat6: 222 Mbits/s with 2x2 MIMO antenna. - Page 8 PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem ➢ RF Performance: • Meets ETSI TS 125.101 (3GPP). • There are two characteristics to specify the RF performance; Transmitter power for Transmitter characteristics and Receiver Sensitivity for Receiver characteristics. These are all defined in the ETSI’s specification.
-
Page 9: Cellular Antenna Interface
PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem ➢ Transmitter Power: • Meets ETSI TS 125.101 (3GPP). ➢ Transmitter Attenuation: • The transmitter output level has programmable limitations depending on the mechanism inside the chip. The transmitter output level is limited by the Transmitter power. Maximum output power of Cellular UE is +23 dBm + 1 dBm per 3GPP standard requirement. -
Page 10: Wireless Lan Interface
PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem ➢ Impedance: • 50 Ω unbalanced. ➢ Gain: • 1 dBi (Peak) per antenna over supported frequency range. ➢ Antenna Isolation: • 20 dB minimum. 2.6 Wireless LAN Interface ➢ Frame Format & Protocol: •... -
Page 11: Wireless Antenna Inteface
PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem • If any discrete input is not active, the RF frequency bands and RF power amplifier output remains disable and cannot be overridden by software. • The eCM has fail safe circuitry to prevent unacceptable radiated or conducted interference to aircraft system. -
Page 12: Electrical Characteristics
PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem 3.0 ELECTRICAL CHARACTERISTICS 3.1 Power Consumption & Current Draw Power Input: Single Input Power – Cannot operate with AC & DC at the same time. (Note: BOEING Installations – Install with 28 VDC Only, Not 115 VAC). -
Page 13: Functions
PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem 4.0 FUNCTIONS 4.1 Functionality and Interface Characteristics The Enhanced Cell Modem (eCM) is a component of the GCS/eXConnect system designed to provide cellular and wireless data bridge from aircraft to ground network server for gatelink application. The eCM communicates with other head-end equipment through dual ports copper gigabit Ethernet and serves as wireless-to-wired network switch, routing media content, application software and service data. -
Page 14: Hardware Block Diagram
PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem 4.2 Hardware Block Diagram Figure 4: LRU Block Diagram(s) PROPRIETARY AND CONFIDENTIAL PAGE 14 OF 22... -
Page 15: Physical Characteristics
PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem 5.0 PHYSICAL CHARACTERISTICS 5.1 Installation Location(s) • The eCM is located in the VCC, Bag Bin or Crown. • Refer to Section Error! Reference source not found. herein for installation limitations. 5.2 Form Factor •... -
Page 16: Digital Inputs And Outputs Characteristics
PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem 5.3 Digital Inputs and Outputs Characteristics 5.3.1 Ethernet Interface ➢ Frame Format & Protocol: • IEEE802.3 Ethernet Specification. ➢ Data Rate: • 1000Mbits/s. ➢ Data Encoding: • Differential Manchester Encoding for 10Base-T. •... -
Page 17: Discrete Inputs And Outputs Characteristics
PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem 5.4 Discrete Inputs and Outputs Characteristics 5.4.1 5V Discrete Input The eCM provides one maintenance Enable discrete input to allow the unit entering test mode. The discrete input has the following requirements: Logic Low – Enable maintenance mode Ground <... -
Page 18: Sim Slots
Under normal operating conditions, when the eCM radios are transmitting in operational frequency bands, there is no potential for interfering with airplane systems. Panasonic chose to use simple hardware to remove power from the COTS radios based on the state of airplane discrete input signals to the eCM in order to preclude the potential for unintended operation resulting in out of band emissions. -
Page 19: Environmental Characteristics
PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem 6.0 ENVIRONMENTAL CHARACTERISTICS 6.1 Operating Temperature -15°C to +55°C PROPRIETARY AND CONFIDENTIAL PAGE 19 OF 22... -
Page 20: Batteries
• The battery part number is BR1225. • The battery manufacturer is Panasonic with UL file# MH1210; or Rayovac with UL file# MH12542. The battery is not required for safe operation of the airplane; The battery is less than 2 Watt-hours;... -
Page 21: Warnings
PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem WARNINGS The “eCM” has the following warning labels located on the Top Panel. Note: Regulatory information is printed on the label as required. For complete list of regulatory information and user countries, see User Guide & Regulatory Statement RS-AA8190-01. -
Page 22: Fcc And Ised Statements
PANASONIC AVIONICS CORPORATION ASC-AA8190-01 Enhanced Cell Modem Figure 8: ESD FCC and ISED Statements FCC statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this devise must accept any interference received, including interference that may cause undesired operation.