Drive Does Not Eject The Tape Cartridge - Quantum LTO-3 User Manual

Drive Does Not Eject the
Tape Cartridge
LTO-3 Half-Height Tape Drive User's Guide
If you cannot eject a tape cartridge from the LTO-3 Half-Height Tape
7
Drive:
1 Verify that the tape drive
off.
IF the Power
LED is . . .
off,
on,
on,
Chapter 7 Troubleshooting Guide
Troubleshooting Suggestions
LED is on and that all other LEDs are
Power
AND other LEDs
are . . . THEN . . .
off, refer to the procedures
for troubleshooting
power problems under
Computer Hardware
Does Not Recognize the
Tape Drive
determine why the
Power LED is not on.
on or flashing, see
determine whether the
other LED activity is
normal or abnormal.
Then proceed to step 2 of
this procedure.
If the amber
is on and the orange
LED is flashing fast to
indicate a Power On Self
Test error, contact
Technical Support to
resolve the possible
problem with the tape
drive.
off, skip to step 3 of this
procedure.
on page 65 to
table 4 on page 37 to
LED
Status
Error
74