Eject The Cleaning Tape - Quantum SuperLoader 3 User Manual

Chapter 3 Tape Cartridge Use
Tape Drive Cleaning
Eject the Cleaning
Tape 3
64
You need to eject the cleaning tape from the SuperLoader under the
following conditions:
• If you do not want to store the cleaning tape in a magazine slot after
manually cleaning the tape drive (DLT/SDLT only)
• If the cleaning tape has expired
When the tape has been used up,
front panel LCD. If you store your cleaning tape, store a new cleaning
tape after you eject the expired one (see
Only)).
To Eject a DLT/SDLT Cleaning Tape
(on Libraries with Firmware prior to v45):
1 On the main menu, scroll to
2 On the Command submenu, scroll to
3 On the Cleaning Tape submenu, scroll to
press . The SuperLoader ejects the cleaning tape from the
Enter
mailslot.
To Eject a Cleaning Tape
(on Libraries with Firmware v45 or later):
1 On the main menu, scroll to
2 On the Configuration submenu, scroll to
This deselects Auto Clean and causes the cleaning tape to be ejected.
SuperLoader User's Guide
Cleaning Tape Expired
Manual Cleaning (DLT/SDLT
, then press
Command
Cleaning Tape
Eject Cleaning Tape
, then press
Configuration
Auto Clean
appears on the
3
.
Enter
, then press .
Enter
, then
3
.
Enter
, then press .
Enter