Table of Contents
Advertisement
Chapter 2 Installing the Rack Mount Shelves
Installing the Shelves
Figure 16 Attaching
the Shelves to the
Extenders
26
Extender
Installing the Rack Mount Shelves
To install the rack mount shelves:
1 From the six sizes of inserts provided in the rack mount kit, select the
insert type that best fits the holes in your rack rails. The insert part
numbers are:
•
213468 (for rails with 9 mm square holes)
•
213469 (for rails with 7 mm diameter unthreaded holes)
•
213471 (for rails with M6 threaded holes)
•
213472 (for rails with 12-24 UNC or M5 threaded holes)
•
213473 (for rails with 10-32 UNF threaded holes)
•
213474 (for rails with 1/4 in. diameter unthreaded holes)
The heads of the inserts (not the threads) should fit into the rack rail
holes smoothly and with very little play.
2 Once you have selected the inserts you will use, set the remaining
inserts aside. You do not need them for this installation.
ATL StackLink™ Installation Instructions
Shelf
2
Advertisement
Table of Contents
Need help?
Do you have a question about the ATL StackLink and is the answer not in the manual?