Table of Contents
Advertisement
Chapter 5 Completing the Installation
Testing the Library Robotics
Testing the Library Robotics
Figure 59 Menu
Screen
86
To complete the installation, run the
StackLink robotics are working correctly:
1 Select a library module on which to initiate the test.
2 Load a single data cartridge into the top left magazine of the selected
library module.
Leave all other slots in the multiple library stack empty.
3 On the GUI main screen of the selected library module, press
The GUI displays the
4 Press
.
Demo
The GUI displays the
ATL StackLink™ Installation Instructions
program to verify that the
Demo 5
screen (see
figure
Menu
screen (see
Demo Programs
.
Menu
59).
figure
60).
5
Advertisement
Table of Contents
