This chapter explains how to install the ATL M1500 and ATL M2500 rack
mount shelves.
When installing the rack mount shelves, keep in mind that
Caution:
the libraries must be installed contiguously, from the top
of the rack downward, with no space between the
libraries. Due to the way the library firmware calculates
the library size and assigns SCSI element addresses,
installing the libraries non-contiguously can cause
problems with the backup software.
For example, the top library in a multiple library stack
must be installed directly beneath the StackLink upper
mounting tray. Each subsequent library must be installed
directly beneath the previous library, with no space in
between.
For information about how the library firmware calculates
library size and assigns SCSI element addresses, see
appendix A, Library Size,
SCSI Element Addressing,
ATL StackLink™ Installation Instructions
Installing the
2
Rack Mount Shelves
on page 89 and
on page 95.
Chapter 2
appendix B,
19