5.5 Maintenance
Cleaning the printer
Wipe the body with a cloth that has been dampened with water and
then wring out thoroughly. Do not use alcohol, benzene, or other so-
lvents. Doing so could not only damage the finish, but could also da-
mage the unit itself.
Cleaning the transport rollers
Use gauze to wipe away any dirt on the transport rollers. If the transport roller is extremely dirty, place a few drops of water
on the gauze, wring the gauze out gently, and then wipe the dirt away. Never use alcohol, benzene, or other solvents. If
such chemicals get inside the unit, they could damage it.
1
Press [Maint].
The Maintenance display appears.
2
Press [
] or [
press [Enter].
3
Open the cover.
138
] to select "Cleaning", and then
Maintenance
Cleaning
Force full cut
Feed
Cleaning mode
Open safety cover
and remove dust.