Adjusting The Printing Density - Partex PROMARK T-800 User Manual

Adjusting the printing density

Printing may be too dark or too light in some cases, depending on the environment in which the printer is used and the
characteristics of the print media. In such cases, adjust the printing density. The printing density can be adjusted to five
levels.
ex. Printing on a tube is too light, so increase the printing density.
1
Press [Func].
The Settings display appears.
2
Press [ ] or [
and then press [Enter].
The Density adjustment display appears.
3
Press [ ] or [
Press [Enter].
The Print density selection display appears.
4
Press [ ] twice to select "5".
Print density "1" is the lightest print density, and print density "5"
is the darkest print density.
Press [ ] to make the printing density lighter.
5
Press [Enter].
The display returns to the character input display. Maximum den-
sity is now selected.
] to select "Density adjustment",
] to select "Print density" then
Advanced Operations
The [ ] indicates that the current
print density is "3" (the standard set-
ting).
PART 4
113 113