Profiles And Ribbon; Loading Continuous Profiles - Partex MK10 Quick Start Manual

2. Profiles and ribbons

2.1 Loading continuous profiles.

• Open cover (13)
• Turn lever (12) counterclockwise to lift the printhead
• Feed the profile into the printer according to the pictures below. Move guides (8)
apart with the green knob (11) until the profile can pass between them..
• You can turn lever (12) clockwise to lower the printinghead if you already have
loaded the printer with a ribbon. If you don't have any ribbon in the printer, load that
according to section 2.2 (page 5)
2009-11-27
QUICK START MK10
13
12
11
10 9 8
9
PARTEX MARKING SYSTEMS
7
14
8 8 11
12
7
4