Dme Wipes; Frame Memory; Color Backgrounds; Copy And Swap - Sony MVS-8000X User Manual

• Random and diamond dust wipe patterns
You can combine two selected patterns (referred to as
"main" and "sub") to create a new pattern (pattern mix).
You can also specify the wipe direction, or set the pattern
position, applying various changes and modifiers to the
selected wipe pattern.
For details, see "Wipes" (page 124).

DME Wipes

A DME wipe is a wipe transition that uses a DME effect to
change from one video image to the next.
There are two types of DME wipe: those which can be
selected for a normal transition, and those which can be
selected for an independent key transition.
The patterns that can be used for a DME wipe are as
follows.
Slide, Squeeze, Split, Door, Flip tumble, Mirror,
Sphere, Character trail, Wave, Ripple, Page turn, Page
roll, Frame in-out, Picture-in-picture, 2D trans, 3D
trans, Sparkle, Split slide, Mosaic, Defocus, Brick, and
User programmable DME
You can also specify the wipe direction, or set the pattern
position, applying various changes and modifiers to the
selected DME wipe pattern.
Resizer DME wipes
Using the resizer, you can carry out key DME wipes.
For details, see "DME Wipes" (page 140).

Frame Memory

Frame memory is a function for using a still image or video
(frame memory clip) as material for editing.
You can create a still image by capturing a frame of input
video or a clip by specifying a range of input video. The
created images and clips can be written to memory for
playback, editing, and output.
For details, see "Frame Memory" (page 156).

Color Backgrounds

This function can be used to obtain color background
video.
Two color signals generated from the dedicated generators
can be switched or mixed, and then output.
For details, see "Color Background" (page 182).
22
Basic Video Processing

Copy and Swap

This function can be used to copy and swap the settings
among the M/E-1 to M/E-3, and PGM/PST banks or
between keyers.
The following settings can be copied or swapped.
• Overall settings for the M/E and PGM/PST banks
• Keyer settings
• Wipe settings in a transition control block
• Wipe settings in an independent key transition control
block
• DME wipe settings in a transition control block
• DME wipe settings in an independent key transition
control block
• Matte color settings (color 1, color 2, and how to
compose them)
• Color settings
• DME channel settings
• Format converter input settings (copy only)
• Format converter output settings (copy only)
For details, see "Copy and Swap" (page 184).

Video Process

The term "video process" is applied to adjustments to the
gain, hue, black level of the input video signal. There are
two types of adjustment; adjustment of an individual input
signal and adjustment as image effects on a particular bus.
For details, see "Video Process" (page 191).

Color Corrector

The color corrector enables video signal color correction
(black balance/white balance adjustment, gamma
correction, knee correction, etc.).
The color corrector includes the following adjustments.
• Input video processing
• Primary color correction
• Secondary color correction
• Luminance processing
• Spot color adjustment
• Output video processing
• YUV/RGB clip
For details, see "Color Corrector" (page 193).

Side Flags

The term "side flags" refers to the areas to left and right of
an image with aspect ratio 4:3 embedded within a 16:9