June 2007
Configuring TAPI phonesets
Guidelines
Use Overlay 11 to configure phonesets for use with Communication Control
Toolkit. Follow these guidelines:
Set the AST value for the phoneset to the key to be monitored by TAPI and
Communication Control Toolkit. For example, if the keys you choose to
control are 00 and 03, set the values for 00 and 03.
Set IAPG=1
To have other Communication Control Toolkit call control features, such as
transfer and conference, program these features on the phoneset.
What next?
You must also configure the phoneset in the TAPI Configuration Tool (see
the Installation and Maintenance Guide). Ensure that the DN Monitored
box is checked.
You must configure the CDN as a terminal in the Communication Control
Toolkit Configuration Tool (see the Installation and Maintenance Guide).
Unsupported keys
Limitations in Meridian Link prevent the Service Provider from supporting the
following keys:
Call park/unpark
No-hold conference call
Pickup
Planning and Engineering Guide
Engineering the switch
83