Configuring A Card; Adding A Card To An Ip Telephony Node - Nortel 1000E Installation And Configuration Manual

Configuring a card

Adding a card to an IP telephony node

Installing and configuring a Voice Gateway Media Card
• Procedure 83: "Displaying the status of Voice Gateway Media Card
units" on page 344
• Procedure 84: "Displaying the status of one unit on a Voice Gateway
Media Card" on
• Procedure 85: "Disabling a Voice Gateway Media Card using Element
Manager" on page 347
• Procedure 86: "Disabling a Voice Gateway Media Card unit using
Element Manager" on
• Procedure 87: "Enabling a Voice Gateway Media Card using Element
Manager" on page 349
• Procedure 88: "Enabling a Voice Gateway Media Card unit using
Element Manager" on
A Voice Gateway Media Card requires configuration of:
• the IP telephony properties defined with Element Manager (the Voice
Gateway Media Cards are assigned to an IP telephony node). See
"Configuring an IP telephony node" on
• the voice gateway channels defined on the CS 1000E. See "Configuring
voice gateway channels using Element Manager" on
The Voice Gateway Media Card is added to an IP telephony node using
Element Manager only. See Element Manager: System Administration
(553-3001-332) for details.
Procedure 76
Adding a Voice Gateway Media Card to an IP telephony node
1 Log in to Element Manager.
2 Select IP Telephony > Nodes: Servers, Media Cards > Configuration
from the navigator.
The Node Configuration web page opens, as shown in Figure 99.
Communication Server 1000E
page 347
page 348
page 350
Page 321 of 488
page 365.
page 325.
Installation and Configuration