Installing and cross-connecting a
trunk card
Contents
Introduction
This section contains information on the following topics:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Circuit card options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Digital trunk cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting a trunk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The work order outlines the placement of circuit cards in the Media Gateway
and Media Gateway Expander. Analog trunks can be installed in both Media
Gateway and Media Gateway Expander. However, digital trunk cards can
only be installed in slots 1 to 4 of the MG 1000T. See Circuit Card:
Description and Installation (553-3001-211) for card placement into card
slots.
Communication Server 1000E
Page 289 of 488
Installation and Configuration
289
293
293
294
295
298
300
310
318