Nortel 1000E Installation And Configuration Manual page 418

Figure 145
General Commands
3 Click the desired node to expand it.
4 Click GEN CMD for the chosen Signaling Server or Media Card.
The General Commands web page opens, as shown in Figure 145.
5 Select NodePwd from the Group drop-down list.
6 Select nodePwdShow from the Command drop-down list.
7 Click RUN.
The current node password information displays in the text area at the
bottom of the web page.
8 Enter the administrator IP Phone Installer Password in the Node
Password box (see Figure 146).
9 Select nodePwdSet from the drop-down list.
Communication Server 1000E
Installing and configuring IP Phones
Page 418 of 488
Installation and Configuration