Nortel 1000E Installation And Configuration Manual page 429

6 Choose one of the following:
a. Enter 0 to configure no VLAN.
The IP Phone displays:
Locating server...
After several seconds, the IP Phone prompts:
Connect Svc
Node: x
TN: x.x
Go to step 7 on
b. Enter 1 to configure manual VLAN.
The IP Phone prompts:
VLAN: x
Go to step 7.
c. Enter 2 to configure automatic VLAN.
The IP Phone prompts:
VLAN: x
Go to step 7
7 Enter the VLAN ID.
The IP Phone displays:
Locating server...
If you did not configure an IP Phone Installer Password, after several
seconds, the IP Phone prompts:
Node: x
TN: x.x
8 Enter the node number and the IP Phone's (virtual) TN, and then go to
step 11 on page
If you configured an IP Phone Installer Password, the IP Phone prompts:
Node: x
PassWord: 0
Communication Server 1000E
Installing and configuring IP Phones
page 429.
430.
Page 429 of 488
Installation and Configuration