7. Replace the side cover of the HMS 400, please refer to "Replacing the Side Cover" on Page
102.
8. Power on the PC
Configuring Dialogic Card
The following screenshots are based on the latest Dialogic SR6.0 Drivers supported by the HMS 400:
1. Click Windows Start button
Configuration Manager – DCM.
Note: Do not attempt to use Windows Add/Remove Hardware to detect the Dialogic Cards
2. Select Local computer name and click Connect.
Auto-detection of card/s will begin
3. The model of the card/s will appear with their corresponding board and slot numbers (The red
circle over the icon of each card signifies that the Dialogic Service has been stopped or has not
been started)
4. Right click on the card you wish to configure and choose Configure Device option
Nortel Hospitality Messaging Server 400
Maintenance Guide
Programs
Intel Dialogic System Release 6.0 PCI
April
2006
-46-