Nortel 1000E Installation And Configuration Manual page 341

Installing and configuring a Voice Gateway Media Card
Figure 116
Node Maintenance and Reports – expanded node
3 Click Status for the desired Voice Gateway Media Card.
The output from this command is displayed in the window pane
(result box).
The output can be one of the following:
xx.xxx.xxx.xxx : Disabled
xx.xxx.xxx.xxx : Enabled
xx.xxx.xxx.xxx : Unequipped
Where xx.xxx.xxx.xxx is the ELAN IP address of the Voice Gateway
Media Card and the meaning of the status is:
• Disabled – The card is configured but out-of-service.
• Enabled – The card is configured and operational.
• Unequipped – The card is not configured in the Call Server.
Procedure 82
Displaying the Voice Gateway status for all voice gateway channels
1 In Element Manager, select IP Telephony > Nodes: Servers, Media
Cards > Maintenance and Reports from the navigator.
The Node Maintenance and Reports web page opens, as shown in
Figure 115 on page
Communication Server 1000E
End of Procedure
340.
Page 341 of 488
Installation and Configuration