Nortel 1000E Installation And Configuration Manual page 62

System components
Page 62 of 488
553-3041-210 Standard 4.00
Table 7
BayStack 470 Switch profile (Part 2 of 2)
Property
Cooling
Card slots
Connectors
(front)
For additional information, refer to Using the BayStack 470 Switch.
Figure 11
Ethernet switch
September 2007
Description
• Forced air cooling with side-to-side air flow.
• The three fans run whenever the unit is on.
• None
• Unit is DCE for serial port connection to PC;
requires null modem for Terminal Server
connection.
• Console port default settings: 9600 baud with 8
data bits, 1 stop bit, and no parity as the
communications format, with flow control set to
enabled.
• 10BaseT/100BaseTX RJ-45 (8-pin modular) port
connectors.