Connecting An Mg 1000T Core To The Elan Subnet - Nortel 1000E Installation And Configuration Manual

Connecting an MG 1000T Core to the ELAN subnet

Figure 42
10/100 BaseT connectors
2
Connecting MG 1000T system components
Follow Procedure 35 to connect an MG 1000T Core to the ELAN subnet.
Procedure 35
Connecting an MG 1000T Core to the ELAN subnet
1 Connect one end of a standard CAT5 cable to the 10/100BaseT ELAN
network interface on the back of the MG 1000T Core as shown in Figure
42.
2 Connect the other end of the standard CAT5 cable to an RJ-45 ELAN
network interface on the ELAN Layer 2 switch (BayStack 470-24T).
10/100
BASE T
Communication Server 1000E
1
10/100
BASE T
End of Procedure
Installation and Configuration
Page 161 of 488