Nortel 1000E Installation And Configuration Manual page 415

Table 53
LD 11 – Configure an IP Phone. (Part 4 of 4)
Prompt Response Description
On the M3903, keys 4-15 are blocked. No feature
assignment is accepted for keys 2-15.
On the M3903, M3904, and M3905, keys 29-31 are
reserved. No feature assignment is accepted for keys
29-31 other than NUL.
On M3904, no feature assignment is accepted for keys
12-15.
On M3905, the technician can assign NUL or a server
application on key 5. On key 6, the craftsperson can
assign NUL or a local application.
On M3905, the technician can assign NUL or the
program key on key 7.
On M3905, the technician can assign AAG, AMG,
ASP,DWC, EMR, MSB, or NRD on keys 8-11. Other
features are blocked.
For IP Phones:
xx = Keys 0-5 (and 6-11 using Shift key). These are
self-labeled physical keys that can be programmed with
any feature.
Note 1: The IP Phone 2002 does not have a Shift key.
Only keys 0-3 can be programmed.
Note 2: Keys 16-26 are reserved for dedicated IP
Phone soft keys.
Table 54 on
name values (aaa). Other key name values can be found
in Software Input/Output: Administration
(553-3001-311).
Communication Server 1000E
Installing and configuring IP Phones
page 416
Page 415 of 488
lists the dedicated IP Phone key
Installation and Configuration