Nortel 1000E Installation And Configuration Manual page 426

7 Enter the default gateway.
The IP Phone prompts:
S1 IP: x.x.x.x
8 Enter the Server 1 IP (node IP).
The IP Phone prompts:
S1 PORT: 4100
9 Enter the Server 1 port.
The IP Phone prompts:
S1 ACTION: 1
10 Enter the Server 1 action.
The IP Phone prompts:
S1 RETRY COUNT: 10
11 Enter the Server 1 retry count.
The IP Phone prompts:
S2 ...
12 Enter same information as for Server 1.
The IP Phone prompts:
VLAN?(0-No,1-Ma,2-Au)0
13 Choose one of the following:
a. Enter 0 to configure no VLAN.
The IP Phone displays:
Locating server...
After several seconds, the IP Phone prompts:
Connect Svc
Node: x
TN: x.x
Go to step 14 on
Communication Server 1000E
Installing and configuring IP Phones
page 427.
Page 426 of 488
Installation and Configuration