Nortel 1000E Installation And Configuration Manual page 164

Page 164 of 488
553-3041-210 Standard 4.00
Connecting MG 1000T system components
Figure 44
Diagram of the Shielded 50-pin to Serial/ELAN/TLAN adapter
TLAN RJ-45
LAN socket
Identification Label
Procedure 38
Inserting a Shielded 50-pin to Serial/ELAN/TLAN adapter on to a
Media Card
1 Open the Media Card package NTDU41CA.
2 Remove the Shielded 50-pin to Serial/ELAN/TLAN adapter.
3 Save the other items from the package for use in "Installing a
CompactFlash" on
4 Insert the adapter, shown in Figure 44, into the connector Card 1, Card 2,
Card 3, or Card 4 that corresponds to the location of the Media Card.
For example, Figure 45 on
slot 1. Therefore, the Adaptor is installed in connector Card 1.
September 2007
ELAN RJ-45
LAN socket
page 330.
page 165, the Media Card is installed in card
End of Procedure
RS-232 Connector
Voice Gateway Media Card
maintenance port
50-pin connector