Nortel 1000E Installation And Configuration Manual page 183

Figure 58
Installation output
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
You have selected to install version x.xx.xx on the system. As
this is a new install, all necessary directories and files will
be created on the hard disk.
Starting new install of version x.xx.xx.
Initializing protected partition ...
"/p" initialized.
Creating directory ... (many directories are created here) ...
Copying ... (many files are copied here) ...
Boot ROM "/p/load/bootrom.bin" installed.
Figure 59
Success
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Software version x.xx.xx was installed successfully.
All files were copied to the hard disk.
Installing and configuring the Signaling Server software
Communication Server 1000E
Page 183 of 488
Installation and Configuration