Nortel 1000E Installation And Configuration Manual page 175

Figure 49
Install Tool banner screen
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
#####
#########
########`` `#############
########
#######`
#######
#######
####### #####`
`#########`
#######`
`#######
##########
##``##########
## `########################
`# `########################
###########################``
`````````
Please press <CR> when ready ...
Installing and configuring the Signaling Server software
########
`` `#############
######```####
######``
#####``
#####'
`###`
````####````
Note: If the system has less than 512 MBytes of RAM, the following
error message appears:
WARNING: Your system has less than 512 MB RAM.
In order to run Rls 4 software you must
upgrade RAM to 512 MB and repeat install.
Otherwise serious service problems are likely
Please enter:
<CR> -> <q> - Quit.
continue install.
Press <CR> to quit. Upgrade to 512 MBytes of RAM and restart the
Signaling Server Install Tool again.
Communication Server 1000E
`###
####
#### Communication Server 1000 Software
####`
##### Copyright 2002 – 2004
#
<CR>
<a> - Accept the possible risks and
NORTEL NETWORKS
Installation and Configuration
Page 175 of 488