Nortel 1000E Installation And Configuration Manual page 81

3 Attach the right ear bracket (marked with an "R") to the holes on the right
side of the Media Gateway.
a. Use two #8-32 machine screws. Position the ear bracket so that the
four holes on the bracket flange are nearer to the rear of the Media
Gateway.
Note: To determine the front of the bracket, locate the "R" on the bracket.
The "R" must be at the top of the bracket and face the front of the Media
Gateway (see Figure 17).
Figure 17
Right ear bracket on a Media Gateway
4 Attach the left ear bracket (marked with an "L") to the holes on the left side
of the Media Gateway (near the front).
Communication Server 1000E
Rack-mounting the components
Bracket flange marked
with an "R". Attach this
ear bracket to the right-
hand side of the
Media Gateway.
Attach the
ear bracket to
these holes.
Page 81 of 488
Installation and Configuration