Connecting A Media Card To The Elan - Nortel 1000E Installation And Configuration Manual

Connecting a Media Card to the ELAN

Connecting MG 1000T system components
Follow Procedure 39 to connect a Media Card to the ELAN.
Procedure 39
Connecting a Media Card to the ELAN
1 Connect a standard CAT5 patch cable to the ELAN network interface on
the adaptor, see Figure 45.
2 Connect the other end of the standard CAT5 patch cable to an RJ-45
ELAN network interface on the BayStack 470 switch.
Figure 45
Shielded 50-pin to Serial/ELAN/TLAN adapter on the Media Gateway
TLAN
Communication Server 1000E
ELAN
End of Procedure
Page 165 of 488
Installation and Configuration