Connecting A Media Card To The Elan Subnet; Procedure 19 - Nortel 1000E Installation And Configuration Manual

Page 114 of 488

Connecting a Media Card to the ELAN subnet

553-3041-210 Standard 4.00
Connecting CS 1000E system components
3 Save the other items from the package for use in "Installing a
CompactFlash" on
4 Insert the adapter, shown in Figure 34, into the connector Card 1, Card 2,
Card 3, or Card 4 that corresponds to the location of the Media Card.
For example, in Figure 35 on
slot 1. Therefore, the adaptor is installed in connector Card 1.
Follow Procedure 19 to connect a Media Card to the ELAN.

Procedure 19

Connecting a Media Card to the ELAN subnet

1 Connect a standard CAT5 patch cable to the ELAN network interface on
the Adaptor (Figure 35 on
2 Connect the other end of the standard CAT5 patch cable to an RJ-45
ELAN network interface on the BayStack 470 switch
September 2007
page 330.
page 115, the Media Card is installed in card
End of Procedure
page 115).