Page 348 of 488
Disabling a card unit
553-3041-210
Standard 4.00
Installing and configuring a Voice Gateway Media Card
The list in the web page changes to show a list of diagnostics you can use,
as shown in Figure 120 on
3
Select Network & Peripheral Equipment Diagnostics from the list in
Figure 120 on
page
The Network and Peripheral Diagnostics web page opens, as shown in
Figure 121 on
page
4
Select the DISC – Disable card command from the Card Commands
drop-down list.
5
Enter the card number in the corresponding Command Parameter text
box.
6
Click Submit to the right of the text box.
The output from this command is shown in the text box in the lower half
of the web page.
Note: For graceful disabling of the voice gateway channels refer to
"Graceful Disable" in IP Line: Description, Installation, and Operation
(553-3001-365).
Follow Procedure 86 to disable a Voice Gateway Media Card unit in
Element Manager.
Procedure 86
Disabling a Voice Gateway Media Card unit using Element Manager
1
Select System > Maintenance from the navigator.
The Maintenance web page opens as shown in Figure 119 on
This page allows you to perform maintenance using overlays or using a
selected functionality. The default is overlay, as shown in Figure 119.
2
Select Select by Functionality.
The list in the web page changes to show a list of diagnostics you can use,
as shown in Figure 120 on
3
Select Network & Peripheral Equipment Diagnostics from the list in
Figure 120 on
page
September 2007
page
345.
345.
346.
End of Procedure
page
345.
345.
page
344.