Nortel 1000E Installation And Configuration Manual page 432

Page 432 of 488
553-3041-210 Standard 4.00
Installing and configuring IP Phones
11 Choose one of the following:
a. Enter 0 to configure no VLAN.
The IP Phone displays:
Locating server...
After several seconds, the IP Phone prompts:
Connect Svc
Node: x
TN: x.x
Go to step 12.
b. Enter 1 to configure manual VLAN.
The IP Phone prompts:
VLAN: x
Go to step 12 on
c. Enter 2 to configure automatic VLAN.
The IP Phone prompts:
VLAN: x
Go to step 12.
12 Enter the VLAN ID.
The IP Phone displays:
Locating server...
If you did not configure an IP Phone Installer Password, after several
seconds, the IP Phone prompts:
Node: x
TN: x.x
13 Enter the node number and the IP Phone's (virtual) TN then go to step 16.
If you configured an IP Phone Installer Password, the IP Phone prompts:
Node: x
PassWord: 0
September 2007
page 432.