Cs 1000E Core Call Server Sdi Connection - Nortel 1000E Installation And Configuration Manual

CS 1000E Core Call Server SDI connection

Configuring a terminal and SDI ports
Figure 87
VT220 setup values
Global Set-Up
On Line
Sessions on Comm1
CRT Saver
Display Set-Up
80 Columns
Interpret Controls
Auto Wrap
Jump Scroll
General Set-up
VT200 Mode, 7-bit Controls
User Defined Keys Unlocked
User Features Unlocked
Multinational
Communications Set-Up
Transmit=2400
Receive=Transmit
Xoff at 64
8bits, No Parity
1 Stop Bit
Printer Set-Up
Speed=9600
Normal Print Mode
8bits, No Parity,
1 Stop bit
Keyboard Set-up
Typewriter Keys
Caps Lock
Auto Repeat
Keyclick High
Margin Bell
Tab Set-Up Screen
Leave this screen at the default values
Each CS 1000E Core Call Server has two SDI ports on the Call Server CPU
card, COM1 and COM2. Both COM1 and COM2 are standard RS232 DTE
ports (9-pin male). COM1 is used for maintenance access, and COM2 is for
an external modem connection. Both SDI ports, COM1 and COM2, are set to:
• Baud rate - 9600
• Data bit - 8
• Stop bit - 1
Communication Server 1000E
Page 269 of 488
Comm1=RS232
Printer Shared
Light Text, Dark Screen
Cursor
Block Style Cursor
Application Keypad
Normal Cursor Keys
No New Line
No Local Echo
Data Leads Only
Disconnect, 2 s Delay
Limited Transmit
Print Full Page
Print National Only
No Terminator
Warning Bell
Break
Answerback=
Not Concealed
Installation and Configuration
70Hz