Nortel 1000E Installation And Configuration Manual page 184
Nortel 1000e server: install guide
Hide thumbs
Also See for 1000E:
- Upgrade (230 pages) ,
- Maintenance manual (222 pages) ,
- Regulatory and safety information (2 pages)
Table of Contents
Advertisement
Page 184 of 488
Figure 60
IP Phone firmware
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
The installation source contains multiple Internet Telephone firmware
files.
Copying /cd0/0603Bxx.bin" to "/u/fw/0603Bxx.bin".
Copying "/cd0/0602Bxx.bin" to "/u/fw/0602Bxx.bin".
Copying "/cd0/0604Dxx.bin" to "/u/fw/0604Dxx.bin".
Figure 61
Voice Gateway Media Card loadware
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
The installation source contains multiple Voice Gateway Media Card
loadware files.
Copying "/cd0/IPL4xxxx.p2" to "/u/fw/IPL4xxxx.p2".
Copying "/cd0/IPL4xxxx.sa" to "/u/fw/IPL4xxxx.sa".
553-3041-210
Standard 4.00
Installing and configuring the Signaling Server software
The system echoes the ELAN network interface MAC address.
For future reference, the ELAN MAC address is:
"00:02:b3:c5:5l:c6".
This address is found on the face of the Signaling Server, on the
right-hand side when the bezel door is open.
Note: The ELAN network interface MAC address must be configured in
the Element Manager node configuration web page.
September 2007
Advertisement
Chapters
Table of Contents
