Connecting A Media Card To The Tlan Subnet; Procedure 20 - Nortel 1000E Installation And Configuration Manual

Connecting a Media Card to the TLAN subnet

Connecting CS 1000E system components
Figure 35
Shielded 50-pin to Serial/ELAN/TLAN adapter on the Media Gateway
TLAN
Follow Procedure 20 to connect a Media Card to the TLAN subnet.

Procedure 20

Connecting a Media Card to the TLAN subnet

1 Connect a standard CAT5 patch cable to the TLAN network interface on
the adaptor (see Figure 35 on
2 Connect the other end of the standard CAT5 patch cable to an RJ-45
TLAN network interface on the BayStack 470 switch.
Communication Server 1000E
ELAN
End of Procedure
page 115).
End of Procedure
Page 115 of 488
Installation and Configuration