Nortel 1000E Installation And Configuration Manual page 130

Page 130 of 488
553-3041-210 Standard 4.00
Installing software on the CS 1000E
10 Select option "<b> To install Software, Database, CP-BOOTROM.".
Communication Server 1000 Software/Database/
BOOTROM RMD Install Tool
=================================================P
lease insert the Removable Media Device into the
drive on Core 1.
Please enter:
<CR> -> <a> - RMD is now in drive.
Continue with s/w checking.
<q> - Quit.
Enter choice> <CR>
11 If the RMD containing the software is already in the drive, select option
'<a> - RMD is now in drive. Continue with s/w checking.' (or simply press
<CR>) to continue. If the RMD is not yet in the drive, insert it and then
press <CR>.
12 The system displays the release of the software found on RMD under the
'swload' directory and requests confirmation to continue the installation.
Communication Server 1000 Software/Database/
BOOTROM RMD Install Tool
=================================================
The RMD contains System S/W version xxxx.
Please enter:
<CR> -> <y> - Yes, this is the correct
version. Continue.
<n> - No, this is not the correct version.
Try another RMD or a different keycode.
Enter choice> <CR>
Note: If the RMD contains the correct software release, select option
'<y> - Yes, this is the correct version. Continue.' (or simply press
to continue. If the software release is not correct and you want to replace
the RMD, insert the correct RMD in the drive and then press
September 2007
)
<CR>
. If you
<CR>