Introduction; Subject; Applicable Systems - Nortel Communication Server 1000 Manual

.

Introduction

This document is a global document. Contact your system supplier or your
Nortel representative to verify that the hardware and software described
are supported in your area.

Subject

The DASS2 document provides:
•
information on DASS2 components and functionality, including
features, application protocols, hardware components and schematics,
hardware and software requirements
•
procedures to install and administer features through overlay
programs, and to maintain DASS2 links
•
lists of applicable system error messages
Legacy products and releases
This document contains information about systems, components, and
features that are compatible with Nortel Communication Server 1000
Release 7.0. For more information about legacy products and releases,
click the Technical Documentation link under Support & Training on the
Nortel home page:
www.nortel.com

Applicable systems

This document applies to the following systems:
•
Communication Server 1000M Single Group (CS 1000M SG)
•
Communication Server 1000M Multi Group (CS 1000M MG)
•
Communication Server 1000E (CS 1000E)
Note:
upgrades on the Signaling Server, the Call Server, or both.
When you upgrade software, you may also require memory
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
11