.
Introduction
This document is a global document. Contact your system supplier or your
Nortel representative to verify that the hardware and software described
are supported in your area.
Subject
This Nortel Technical Publication (NTP) provides information about
implementing the Mini-Carrier Remote feature on CS 1000 and Meridian 1
systems.
It describes the operation of the mini-carrier equipment and provides
specific information on how to install and maintain this equipment as
an integral part of the PBX systems. Mini-Carrier Remote equipment
configuration is identical to the equivalent standard system equipment.
However, there are some additional mini-carrier specific commands that
can be executed using the Man-Machine Interface (MMI) terminal to
specifically control mini-carrier equipment.
The Mini-Carrier Remote system complies with Part 68 of the United
States Federal Communication Commission (FCC) rules. Refer to
"Regulatory approvals" (page
Note on legacy products and releases
This NTP contains information about systems, components, and features
that are compatible with Nortel Communication Server 1000 software. For
more information on legacy products and releases, click the Technical
Documentation link under Support & Training on the Nortel home page:
www.nortel.com
Applicable systems
This document applies to the following systems:
•
Communication Server 1000M Single Group (CS 1000M SG)
•
Communication Server 1000M Multi Group (CS 1000M MG)
Nortel Communication Server 1000
Mini-Carrier Remote Fundamentals
NN43001-557 04.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
119).
9