Section 5: Parts and Module Replacement
5.11.1 AC Line Filter
(Estimated Replacement Time: 15 minutes)
1. Remove the rear right skin. Refer to
Right Skin (ignitor/blower
2. Remove the front top lid. Refer to
Top
Lid.
3. Open the lamp door. Refer to
Door.
4. Rotate the rear top lid to gain access to the
igniter/blower compartment. Refer to
Rear Top
Lid.
5. Remove the two hex nuts from the bracket the
AC line filter is secured to, which is secured to
the firewall. (Figure 5-44)
6. Disconnect the two harnesses from the AC line
filter.
7. Remove the AC line filter.
5-28
5.4.4 Rear
compartment).
5.4.2 Front
5.4.8 Lamp
5.4.12
Figure 5-44 Remove AC Line Filter
D4K35 Service Manual
020-100817-01 Rev. 1 (04-2012)