How To Install The Diskette Drive - Sun Microsystems Enterprise 250 Owner's Manual

How to Install the Diskette Drive

Before You Begin
Complete these tasks:
"How to Power Off the System" on page 26
"How to Remove the Side Access Panel" on page 31
"How to Avoid Electrostatic Discharge" on page 35
"How to Remove the Removable Media Assembly (RMA)" on page 100
What to Do
1. If necessary, remove the metal filler panel from the diskette drive bay in the
removable media assembly.
Pinch the two metal retainers together to release the filler panel from the front of the
RMA enclosure.
2. If necessary, remove the plastic filler panel from the RMA plastic cover.
Squeeze the two retainer posts together to release the filler panel from the RMA
plastic cover.
3. Slide the diskette drive into the diskette drive bay.
Align the two screw holes on each side of the diskette drive with the corresponding
holes in each side of the diskette drive bay.
120 Sun Enterprise 250 Server Owner's Guide • June 1998