How To Attach A Twisted-Pair Ethernet (Tpe) Cable - Sun Microsystems Enterprise 250 Owner's Manual

How to Attach a Twisted-Pair Ethernet
(TPE) Cable
Before You Begin
If you are attaching a twisted-pair Ethernet (TPE) cable to the system's standard
Ethernet interface, you must perform the following task:
Complete prerequisite steps in "How to Install the Enterprise 250 Server" on
page 13.
If you are installing an additional Ethernet interface, you must perform the
following tasks:
Install the system; see "How to Install the Enterprise 250 Server" on page 13.
Install a PCI Ethernet interface card; see "How to Install a PCI Card" on page 87.
What to Do
1. Locate the RJ-45 connector for the appropriate Ethernet interface.
The system comes with one TPE connector on the rear panel. Your system may also
include one or more additional TPE connectors provided via PCI Ethernet interface
cards.
178 Sun Enterprise 250 Server Owner's Guide • June 1998