Sun Microsystems Enterprise 250 Owner's Manual page 244

Variable Setting
diag- false
continue?
true
n
diag-passes
diag-targets none
iopath
media
device
loopback
loopbacks
loopback2
loopback3
nomem
device&loopback
device&loopbacks
device&loopback,3
diag-trigger power-reset
error-reset
soft-reset
226 Sun Enterprise 250 Server Owner's Guide • June 1998
Description
Stops testing within a test routine and prints a
message as soon as an error is detected. OBDiag
then skips to the next test routine in the
sequence.
Causes OBDiag to run all subtests within a test,
even if an error is detected.
Repeats each test the number of times specified
by n. Works with the test, except, and
test-all commands.
Runs internal tests only, no I/O testing.
Extends testing to external device interfaces
(connectors/cables).
Extends testing to external devices and media,
if present.
Invokes built-in self-test (BIST) on PCI cards and
external devices.
Runs external loopback tests on the parallel,
serial, keyboard, mouse, TPE, and RSC serial
ports.
Not for use on Enterprise 250 servers.
Not for use on Enterprise 250 servers.
Runs external loopback tests on the RSC
Ethernet port
Performs tests without testing system memory.
Runs built-in self-test (BIST) on PCI cards and
external devices, then runs external loopback
tests on the parallel, serial, keyboard, mouse,
TPE, and RSC serial ports.
Not for use on Enterprise 250 servers.
Runs built-in self-test (BIST) on PCI cards and
external devices, then runs external loopback
tests on the parallel, serial, keyboard, mouse,
TPE, RSC serial, and RSC Ethernet ports.
Runs diagnostics only on power-on resets.
Runs diagnostics only on power-on resets, fatal
hardware errors, and watchdog reset events.
Runs diagnostics on all resets (except XIR).
Default
false
1
none
power-reset