How To Remove A Tape Cartridge - Sun Microsystems Enterprise 250 Owner's Manual

How to Remove a Tape Cartridge

Before You Begin
Note – The information in this section applies to a DDS-3 tape drive. If you have a
different type of tape drive installed, see the specifications shipped with the drive
for information.
What to Do
1. Check that there is no drive activity.
The green activity LED should be unlit. A flashing LED indicates drive activity.
Caution – Do not eject the tape cartridge when the drive is active, or you may incur
data loss or equipment damage.
Activity LED
2. Push the Eject button and remove the tape cartridge.
What Next
To insert a cartridge into the drive, see:
"How to Insert a Tape Cartridge" on page 210
Attention LED Eject button
Chapter 10 Using Storage Devices 211