Sun Microsystems Enterprise 250 Owner's Manual page 113

What to Do
1. Locate the NVRAM/TOD module on the main logic board.
The NVRAM/TOD module is located at board address U2706.
2. Grasp the NVRAM/TOD carrier assembly by the edges and pull out the
NVRAM/TOD module.
Place the NVRAM/TOD module on an antistatic mat.
What Next
To replace the NVRAM/TOD module complete this task:
"How to Install the NVRAM/TOD Module" on page 96
Chapter 5 Removing and Installing Main Logic Board Components 95