How To Install The Chassis Foot Glides - Sun Microsystems Enterprise 250 Owner's Manual

How to Install the Chassis Foot Glides

Before You Begin
Complete this task:
"How to Power Off the System" on page 26
"How to Remove the Floor Casters Assembly" on page 146
What to Do
1. Carefully turn the system chassis upside down.
Enlist the help of another person to accomplish this safely.
Do not lift the chassis using the plastic panels at the front or the side of the chassis.
Place the system onto a solid surface that spaces the unit about 2 inches (5 cm) off
the floor; for example, use a pair of wooden boards. Do not allow any of the weight
to rest on the plastic panels at the front of the chassis.
2. Attach the four plastic foot glides to the corresponding mounting holes on the
underside of the chassis.
Insert a Phillips screw through the center of each foot glide.
Note – Two of the plastic foot glides attach directly to the chassis. The other two
glides are attached using mounting brackets. These brackets should already be
installed on your system. If they are missing, install the two mounting brackets
provided with the foot glides. Use two Phillips screws to attach each bracket.
152 Sun Enterprise 250 Server Owner's Guide • June 1998