Sun Microsystems Enterprise 250 Owner's Manual page 104

4. Pull the PCI card out of its slot.
Hold the card by the faceplate and its opposite edge, and pull each end in turn until
the card is freed from its slot. Place the PCI card on an antistatic mat.
5. If you are not replacing the PCI card, install a PCI filler panel into the
vacated slot.
Secure the filler panel with the screw from the PCI faceplate.
What Next
To replace a PCI card, complete this task:
"How to Install a PCI Card" on page 87
86 Sun Enterprise 250 Server Owner's Guide • June 1998