Sun Microsystems Enterprise 250 Owner's Manual page 134

5. Insert and tighten the four flat-head Phillips screws that secure the drive
in its bay.
There are two screws on each side that secure the drive in the RMA.
6. Connect the SCSI data and power cables to their corresponding connectors at the
rear of the drive.
The connectors are keyed so that they install in only one way.
Note – Wide SCSI removable media devices require a 68-to-50 pin SCSI adapter.
These devices only operate in narrow SCSI mode.
116 Sun Enterprise 250 Server Owner's Guide • June 1998