Sun Microsystems Enterprise 250 Owner's Manual page 130

12. If you are performing a hot-plug installation, complete the software part of the
installation procedure.
See "About Internal Disk Drives" on page 54.
What Next
If you have other parts to replace in the system, do so now.
When you are ready to restart the system, be sure to run POST and OpenBoot
Diagnostic tests to verify that the system functions correctly with the new parts you
have just installed. You must also perform a reconfiguration boot so that your
system is able to recognize the new device(s). For additional information, see:
"How to Initiate a Reconfiguration Boot" on page 29
112 Sun Enterprise 250 Server Owner's Guide • June 1998