Sun Microsystems Enterprise 250 Owner's Manual page 163

12. Replace the plastic outer panel that partially covers the top of the chassis:
a. Insert the hooks on the underside of the panel into the corresponding slots in
the chassis.
b. Slide the panel toward the front of the system until the hooks engage the
chassis, and the rear edge of the panel snaps into place.
Press along the bottom edge of the panel to guide it into place.
What Next
To reassemble the system, complete these tasks:
"How to Install the Removable Media Assembly (RMA)" on page 104
"How to Install the Fan Tray Assembly" on page 126
"How to Install a Disk Drive" on page 110
"How to Install the Side Access Panel" on page 33
Note – When you reinstall the disk drives, it is important to return each drive to its
original location.
Chapter 7 Removing and Installing Miscellaneous Assemblies 145