How To Remove The Side Access Panel - Sun Microsystems Enterprise 250 Owner's Manual

How to Remove the Side Access Panel

Caution – Do not operate the system while any of its plastic outer panels or doors
are removed.
Caution – Removing the side access panel or removable media assembly activates
the system power interlock switches. This safety mechanism prevents all DC
voltages (except 5V standby power) from reaching any internal component when the
side panel or removable media assembly is removed and the front panel keyswitch
is left on. Do not remove the side access panel or removable media assembly while
the system is operating or the system will power off abruptly.
Before You Begin
Complete this task:
"How to Power Off the System" on page 26
What to Do
1. Remove the security lock block (if present).
See "How to Install the Security Lock Block" on page 17.
2. Loosen the two captive screws securing the side panel to the rear of the chassis.
Chapter 3 Preparing to Install or Replace Parts 31