Sun Microsystems Enterprise 250 Owner's Manual page 242

OBDiag Menu
The OBDiag menu is created dynamically whenever you invoke OBDiag in
interactive mode. OBDiag determines whether any optional devices are installed in
the system. If the device has an on-board self-test, OBDiag incorporates the test
name into the list of menu entries. It sorts the menu entries in alphabetical order and
numbers them accordingly. Therefore, the menu entries may vary from system to
system, depending on the system configuration.
The OBDiag menu always displays the core tests that exercise parts of the basic
system. These tests include envctrltwo, ebus, ecpp, eeprom, fdthree, network,
scsi@3, scsi@3,1, se, su, and rsc. For information about each test, see "OBDiag
Test Descriptions" on page 227. For a description of the interactive commands for
running OBDiag, see "OBDiag Commands" on page 225.
Once you invoke OBDiag as described in "How to Use OpenBoot Diagnostics
(OBDiag)" on page 230, the OBDiag menu is displayed.
1 SUNW,envctrltwo@14,60
4 eeprom@14,0
7 scsi@3
10 se@14,306f8
Commands: test test-all except help what printenvs setenv exit
command>
224 Sun Enterprise 250 Server Owner's Guide • June 1998
OBDiag - Version X.X
2 ebus@1
5 fdthree@14,3023f0
8 scsi@3,1
11 su@14,3083f8
3 ecpp@14,3043bc
6 network@1,1
9 se@14,400000
12 rsc